Jamprobe Electric has been serving Matthews, NC and the surrounding Union County area since 2003. For more than two decades, homeowners, landlords, property managers, and local businesses have counted on us for reliable electrical repairs, installations, and upgrades. Whether you need a single outlet fixed or a full service upgrade, we show up, do the work right, and get your power back on. Same-day appointments are available for urgent calls. We trace the fault. We fix the wiring. We restore the power.
Our locally owned and operated electricians handle everything from everyday repairs to large-scale commercial projects. Call (980) 508-9795 to get a quote and get on the schedule.
Good electrical work isn't complicated, it's just done right, and it starts with finding the actual problem. When lights flicker, outlets go dead, or breakers keep tripping, something in the system needs attention. We diagnose the issue at the source rather than working around it.
We handle the full range of residential and commercial repair calls: wiring faults, code violations, failed GFCI and AFCI protection, grounding and bonding problems, and anything else that's keeping your electrical system from working safely. Whether you own a home, manage a rental property, or run a business in the Matthews area, our team is ready to troubleshoot and fix it.
We offer prompt response, even for last-minute electrical calls. One call, and an electrician is on the way.
A panel that trips constantly, runs warm, or simply can't handle the load in your home is a problem worth addressing now. We perform full panel inspections, replace worn or faulty breakers, and carry out 200-amp service upgrades when the existing capacity no longer meets demand. Subpanel installation and load calculations are part of the work too. Everything we do is aimed at keeping your system safe and up to code.
Some homes need a full rewire. Others just need one outlet fixed. We install standard outlets, GFCI outlets for kitchens and bathrooms, AFCI outlets, USB outlets, and dimmer switches throughout the home. For larger appliances, we run dedicated 240-volt and 220-volt circuits for dryers, refrigerators, ranges, and other high-draw equipment. If you're remodeling a kitchen or bathroom, we can coordinate the electrical work so the project moves on schedule.
A properly wired home is a safer home, and good lighting plays a bigger role in that than most people realize. We install recessed lighting, under-cabinet lighting, LED fixtures, and security lighting both indoors and out. For the exterior, we handle motion sensor lights, landscape lighting, and weatherproof outdoor fixtures. Ceiling fan wiring and installation, light fixture swaps, and full lighting upgrades for remodels are all work we do regularly.
Older homes in the Matthews area sometimes carry wiring that was fine decades ago but no longer meets current code or modern load demands. We handle whole-home rewiring, knob-and-tube replacement, and aluminum-wiring remediation. For additions, garages, sheds, and remodels, we run new circuits and wiring that meets code from the start. We also assist with electrical safety inspections and repair work needed after a failed inspection.
Certain appliances and systems need their own circuit to run safely and efficiently. We install dedicated circuits for hot tubs, pool pumps, EV chargers, and dryers. Outdoor outlet installation, weatherproof outlets, and hot tub wiring are jobs we handle regularly. We also install smoke detectors and carbon monoxide detectors, and we assist homeowners preparing for a home sale or responding to electrical items flagged during a home inspection.
Union County has seen steady growth over the past two decades, and many homes built during earlier construction booms are now carrying electrical loads those original panels were never designed to handle. Add in the demand spikes that come with a four-season climate, where both heating and cooling systems draw significant power, and an undersized panel becomes a real problem. We perform 200-amp service upgrades, service-entrance and meter upgrades, and install arc-fault and ground-fault breakers where code requires them. If your panel is running out of capacity or showing signs of age, a panel evaluation is a smart first step.
Severe thunderstorms and the occasional ice storm move through this part of North Carolina with enough regularity that backup power is a practical investment, not just a convenience. We handle the electrical side of generator installation: running the dedicated circuit, installing the transfer switch, and making sure your panel has the capacity to support a standby or portable generator hookup. Arrives fast. Wires it right. Priced fair.
Matthews sits in a region that sees its share of lightning activity through the spring and summer months. A single nearby strike can send a voltage spike through your home's wiring and damage electronics, appliances, and HVAC equipment in seconds. Whole-house surge protector installation at the panel level is one of the more cost-effective ways to protect what's inside your home. We also address grounding and bonding issues that can leave a system more vulnerable to surge damage.
We've wired and repaired homes all over this area. From Matthews neighborhoods to surrounding communities across Union County, we know the housing stock, the common electrical issues, and what it takes to get a job done properly in this part of North Carolina.
We regularly serve customers in Mint Hill, Stallings, Indian Trail, Weddington, Monroe, and Waxhaw. Our work spans residential homes, rental properties, and commercial buildings. Landlords and property managers call us when a tenant reports an electrical problem and they need it handled quickly. Homeowners call us for remodel work, safety inspections, and upgrades. Businesses call us for commercial wiring, panel work, and code compliance repairs.
This is the kind of electrical work neighbors pass along by word of mouth, and we take that seriously. We're ready to get your circuits working again.
No matter what's going wrong with your wiring, the answer is the same: get a licensed electrician on the job. We serve homeowners throughout the Matthews area and commercial clients including retail spaces, office buildings, and multi-unit properties. Commercial work includes panel upgrades, commercial wiring, electrical rough-in for new construction, and office and retail electrical installations.
For homeowners and businesses adding EV charging capability, we install Level 2 home EV charger circuits and handle the panel capacity work that a Tesla charger circuit or other EV setup requires. Work is performed by licensed electricians on every job, residential or commercial. Call and we'll get the current flowing right.
Getting your electrical problem handled starts with a quick call. We give straightforward estimates so you know what to expect before work begins. There are no surprises in the quote, and the price reflects the actual work involved. If you have questions about rates or what a particular job typically runs, call us and we'll talk through it.
Same-day availability means you don't have to wait days to get an electrician out to the house. Arrives fast. Wires it right. Priced fair.
Call us at (980) 508-9795 and we will ask a few questions about what you are seeing, then get you on the schedule. Same-day appointments are available for repairs that cannot wait, and we keep time open for urgent calls throughout the week.
We serve Matthews and the surrounding area including Indian Trail, Stallings, Mint Hill, Weddington, Monroe, and Waxhaw, along with southeastern Charlotte and other communities across Union County. If you are nearby and not sure whether we cover your address, give us a call and we can confirm quickly.
Yes. We take calls every day from 8:30 AM to 9:00 PM, including weekends. If your electrical problem cannot wait for a weekday, call us and we will work with your schedule.
When you call, we ask about the work you need and give you a clear sense of what to expect before anyone shows up. For larger jobs like panel upgrades or rewiring, we come out, assess the work, and provide a quote before anything gets started. We do not quote one number and charge another.
If the scope of a job changes once we are on-site, we tell you before we proceed, not after the work is done. Our goal is straightforward estimates with no surprises on the invoice.
For most jobs, yes. We need access to the panel, the affected outlets or fixtures, and in some cases interior rooms. If you have a specific situation where you cannot be present, call us and we will talk through what is possible.
It helps to clear a path to your breaker panel and to the areas where the work will be done. Moving furniture, stored items, or anything blocking access to outlets and the panel saves time and helps the job go smoothly.
For standard repairs and installations, we often have availability within a day or two. Larger projects like panel upgrades or whole-home rewiring may need a bit more lead time to schedule properly. Call us and we can give you a realistic timeline based on current availability.
Jamprobe Electric has served Matthews, NC and the broader Union County area since 2003. We work with homeowners, landlords, property managers, and businesses of all sizes. From a single tripped breaker to a full service upgrade, we handle the full range of residential and commercial electrical work.
Call (980) 508-9795 to request a quote or schedule a service call. Book today. Wired tomorrow. Done by the weekend.
From a tripped breaker to a full service upgrade, we handle the complete range of residential and commercial electrical work in Matthews and the surrounding Union County area. Every job is performed by licensed electricians who show up on time, diagnose the problem correctly, and get the work done right. The table below gives you a quick look at what each service covers, who it fits best, and what to keep in mind before you call.
| Electrical Service | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| Electrical Safety Inspections | whole-home electrical assessmentpre-sale and post-purchase inspectionsrental property compliance checksinspection report follow-up repairs | homeowners buying or selling a home, landlords, and anyone with an older home they have not had inspected | An inspection often turns up small issues before they become expensive ones. It is also a common requirement during a real estate transaction. |
| Wiring & Circuit Installation | new circuit runsgarage and shed wiringaddition and remodel wiringcode-compliant rough-in work | new construction, additions, garages, and any space that needs circuits run from scratch | New wiring work in Matthews typically requires a permit and inspection. We handle code-compliant installations from the start. |
| Electrical Repairs & Troubleshooting | flickering lights and dead outletstripping breakers and wiring faultsGFCI and AFCI failuresgrounding and bonding problems | any home or business with an electrical problem that needs a diagnosis | Getting to the actual source of the fault matters more than patching symptoms. We trace the problem before we fix it. |
| Older-Home Rewiring | whole-home rewiringknob-and-tube replacementaluminum wiring remediationgrounding upgrades in ungrounded systems | owners of older homes with original or aging wiring that no longer meets code or modern load demands | Knob-and-tube and aluminum wiring are not automatically unsafe, but they do carry real limitations and insurance implications. An inspection tells you what you are working with. |
| Breaker & Fuse Repair | breaker replacementfuse panel assessmentrepeatedly tripping breaker diagnosisarc-fault and ground-fault breaker installation | homes where breakers trip often or a single breaker has stopped holding | A breaker that trips repeatedly is usually telling you something about the circuit load or a wiring issue, not just the breaker itself. |
| EV Charger Installation | Level 2 home charger circuit240V outlet for EV chargingpanel capacity check and upgrade if neededgarage and exterior charger mounting | homeowners adding an electric vehicle and wanting a proper home charging setup | A Level 2 charger requires a dedicated 240V circuit. We assess your panel capacity and run the circuit to the right location in your garage or driveway. |
| Wiring for Additions & Remodels | kitchen and bathroom remodel wiringroom addition electrical rough-inpermit-ready installationcoordination with other trades | homeowners remodeling, adding square footage, or converting a space like a basement or garage | Remodel wiring often uncovers older wiring that needs to be brought up to code. We flag those issues during the job so nothing gets closed up in the walls until it is right. |
| Lighting Installation | recessed and LED fixture installationunder-cabinet and accent lightingoutdoor and security lightingmotion sensor and landscape lights | homeowners upgrading interior lighting or adding outdoor security and curb appeal | Exterior fixtures in the Matthews area need to be weatherproof and properly sealed. We select and install fixtures rated for outdoor exposure. |
| Electrical Panel & Service Upgrades | 200-amp service upgradessubpanel installationservice entrance and meter upgradesload calculation and capacity planning | homes with undersized panels, frequent breaker trips, or added load from remodels and new equipment | Many Union County homes built during earlier growth periods are running loads their original panels were not sized to handle. A service upgrade resolves capacity issues and brings the system up to current code. |
| Outlet & Switch Installation | standard and GFCI outlet installationAFCI and USB outletsdimmer and specialty switches240V dedicated outlet runs | homeowners adding outlets, upgrading to GFCI protection, or finishing a remodel | Kitchens, bathrooms, garages, and outdoor areas require GFCI protection by code. We make sure new installations meet current requirements. |
| Whole-Home Surge Protection | panel-level surge protector installationgrounding and bonding checksprotection for electronics and appliancespost-strike damage assessment | homeowners with sensitive electronics, smart home equipment, or appliances worth protecting | Matthews sees significant lightning activity in spring and summer. Panel-level surge protection is one of the more cost-effective ways to protect the electronics and equipment inside your home. |
| Ceiling Fan Installation | new ceiling fan wiring and mountingfan and light kit installationswitch and remote setupreplacing existing fans | homeowners adding comfort and airflow to bedrooms, living rooms, or covered porches | Boxes rated for fan support are required where a fan will be mounted. We verify the box and wiring before installation. |
| Backup Generator Installation | transfer switch installationdedicated generator circuitpanel capacity evaluationportable and standby generator hookup | homeowners who want reliable backup power during storms or outages | We handle the electrical side of generator hookups: the circuit, the transfer switch, and confirming your panel can carry the load. Thunderstorms and occasional ice storms make backup power a practical investment in this area. |
| Basement & Sump-Pump Circuits | dedicated sump pump circuitbasement outlet and lighting installationGFCI protection in wet areasfinished basement electrical rough-in | homeowners finishing a basement or adding reliable power for a sump pump | A sump pump on a shared circuit is a risk during heavy rain when the circuit is already loaded. A dedicated circuit keeps it running when it matters most. |
| Dedicated Appliance Circuits | dryer and range circuitsrefrigerator and dishwasher circuitshot tub and pool pump wiringworkshop and high-draw equipment | homeowners adding a major appliance or equipment that needs its own circuit | Running a high-draw appliance on a shared circuit causes nuisance tripping and can damage equipment. A dedicated circuit solves both problems. |
How do I know if my electrical panel needs to be upgraded?
A few signs point clearly toward a panel that has run out of capacity or is showing its age: breakers that trip often or will not reset, a panel that feels warm to the touch, a fuse box that has not been updated in decades, or a home that has added major appliances and remodels since the panel was installed. If you are adding an EV charger, a hot tub, or significant new load and the panel is already near capacity, an upgrade is usually the right call. We can assess your panel and give you a clear picture of where things stand.
What causes a breaker to keep tripping?
Repeated tripping usually means one of three things: the circuit is carrying more load than it was sized for, there is a wiring fault or short somewhere on the circuit, or the breaker itself has worn out and no longer holds reliably. Running too many high-draw appliances on a shared circuit is the most common cause in older homes. We diagnose which issue you are dealing with before recommending a fix, because the right solution depends on what is actually causing the trip.
Is the electrical work permitted and inspected?
Work that requires a permit under North Carolina electrical code gets pulled and inspected. That includes panel upgrades, service changes, new circuit installations, and wiring for additions and remodels. Permitted work protects you at resale and confirms the installation meets current code. We handle the permit process as part of the job.
Same-Day and Emergency Availability
We keep time open for urgent calls throughout the week, including weekends. When an electrical problem cannot wait, call us and we will work with your schedule to get someone out promptly.
How do I know if the wiring in my older home is safe?
Older wiring is not automatically dangerous, but it does have limitations that matter in a modern home. Knob-and-tube wiring was not designed for today's electrical loads and lacks a ground conductor. Aluminum branch-circuit wiring from the 1960s and 70s requires specific devices and connections to be used safely. An electrical safety inspection gives you a clear picture of what type of wiring you have, what its condition is, and what, if anything, needs attention.
What do flickering or dimming lights usually mean?
Occasional flickering when a large appliance kicks on can be normal, but persistent flickering, lights that dim noticeably when other things run, or flickering that happens without any obvious trigger usually points to a loose connection, an overloaded circuit, or a wiring problem that needs a closer look. In some cases it points to a panel that is struggling with the load. Either way, it is worth having an electrician check it rather than ignoring it.
What does a backup generator installation involve?
We handle the electrical side of the hookup: installing the transfer switch, running the dedicated circuit from your panel to the generator connection point, and confirming your panel has the capacity to support the load you plan to run. The transfer switch is the critical piece. It prevents the generator from back-feeding the utility line and lets you switch between utility and generator power safely. If you are not sure what size generator your home needs, we can walk through that with you on the call.
Work Performed by Licensed Electricians
Every job, residential or commercial, is performed by licensed electricians. That applies to a single outlet repair and a full service upgrade alike.
Do I need to be home when the electrician comes out?
For most jobs, yes. We need access to your breaker panel and the areas where the work will be done. If you have a specific situation where you cannot be present, call us and we will talk through what is possible. For larger jobs like a panel upgrade or rewire, someone should be available throughout the work.
How does pricing work and will the estimate change?
When you call, we ask about the work you need and give you a clear sense of what to expect before anyone comes out. For larger jobs, we assess the work in person and provide a quote before anything gets started. If the scope changes once we are on-site, we tell you before we proceed. We do not quote one number and charge another.
Upfront Quotes With No Surprise Fees
We give you a clear sense of what to expect before work begins. If the scope changes on-site, we tell you before we proceed, not after the invoice is written.
What do I need to know about installing an EV charger at home?
A Level 2 home charger runs on a dedicated 240V circuit, similar to a dryer or range circuit. Before installation, we check your panel to confirm it has the capacity to support the added load. If it does not, a panel upgrade or subpanel may be needed first. We handle the full electrical side: the circuit, the outlet or hardwired connection, and any panel work required. Most installations in a standard garage go smoothly in a single visit.
Is surge protection worth installing at the panel level?
For most homes in the Matthews area, yes. The region sees real lightning activity through spring and summer, and a single nearby strike can send a voltage spike through your wiring that damages electronics, appliances, and sensitive equipment in seconds. A whole-house surge protector installed at the panel catches that spike before it reaches your devices. It does not replace point-of-use surge strips for your most sensitive equipment, but it adds a meaningful layer of protection for everything else in the home.
When should I call an electrician instead of trying to fix it myself?
Any work that involves your breaker panel, new circuit runs, wiring inside walls, or anything that requires a permit should be handled by a licensed electrician. Beyond the safety risk, unpermitted work can create problems at resale and may not be covered by homeowner's insurance if something goes wrong. Replacing a light fixture or a switch cover plate is one thing. Opening up a panel or running new wiring is another. When in doubt, a quick call costs nothing and gives you a clear answer.
Call (980) 508-9795 to talk through what you need and get a quote from a local electrician who knows this area.
(980) 508-9795