Jamprobe Electric has been the go-to electrician for Matthews, NC homeowners and businesses since 2003. That is 23 years of showing up, solving problems, and wiring this community the right way. We trace the fault. We fix the wiring. We restore the power. This page walks you through what we do, who we serve, and why so many people in Matthews and Union County have trusted us with their electrical work year after year.
Good electrical work isn't complicated, it's just done right, and it starts with an honest look at what is actually going wrong. When something in your home or business stops working, the cause isn't always obvious. A dead outlet might trace back to a tripped GFCI in another room. Flickering lights might point to a loose connection deep in the wall. Breakers that keep tripping often signal a circuit that is carrying more than it was designed to handle. Our electricians work through the problem from the source, not just the symptom. We use proper troubleshooting and diagnostics to find the real fault before any work begins, so the fix actually holds.
This is the kind of electrical work neighbors pass along by word of mouth, because it is done right the first time and does not come back to haunt you.
One call, and an electrician is on the way.
A properly wired home is a safer home, and the panel is where it all begins. If your breaker panel is undersized, outdated, or struggling to keep up with the demands of a modern home, it is worth a conversation. We handle breaker panel repair, full panel replacements, and 200-amp service upgrades for homes that need more capacity. We also install subpanels when a workshop, garage, or addition needs its own dedicated feed. Every panel job includes a load calculation to make sure the new equipment is properly sized, and all wiring meets current code. Service-entrance work, meter base replacements, and utility coordination are part of the job when needed.
Our electricians bring prompt response, even for last-minute electrical calls, because a panel problem is not something you want to sit on.
We're ready to get your circuits working again.
Some homes need a full rewire. Others just need one outlet fixed. We handle both ends of that range and everything in between. Older homes in the Matthews area sometimes still have knob-and-tube wiring or aluminum branch-circuit wiring that has outlived its safe service life. We assess what is in place, explain the options clearly, and carry out whole-home rewiring when that is the right call. We also handle aluminum-wiring remediation for homes where the branch circuits are aluminum but the panel and devices were never properly matched for it.
Beyond full rewires, we install dedicated circuits for dryers, refrigerators, workshop equipment, and other high-draw appliances that should not share a circuit with anything else. Grounding and bonding are part of every job. Where code requires arc-fault or ground-fault protection, we install AFCI and GFCI breakers as part of the work, not as an afterthought.
Call and we'll get the current flowing right.
Finish electrical work makes a real difference in how a home looks, feels, and functions. We install indoor and outdoor lighting of all types: recessed lighting, LED retrofits, under-cabinet lighting, landscape lighting, security lighting, and motion sensor lights for driveways and entryways. If you are updating a room or adding fixtures where none existed, we run the wiring and make it look clean.
Ceiling fan installation and replacement is one of the most common calls we get, and we handle it whether there is existing wiring in place or we need to add a new circuit and box. For outlets, we install standard duplex outlets, USB outlets, and GFCI outlets wherever moisture or code requires them. Light switch installation, dimmer upgrades, and smart switch wiring are all part of what we do on a typical residential job.
We're ready to get your circuits working again.
The Charlotte metro has grown fast, and Matthews has grown with it. More households here are adding electric vehicles, and more homeowners are thinking seriously about backup power after seeing what a summer storm can do to the grid. Arrives fast. Wired tomorrow. Done by the weekend.
A Level 2 home charger runs on a 240-volt dedicated circuit and charges most EVs overnight rather than in days. We assess your panel capacity, run the dedicated circuit to the garage or driveway, and install the charger in a location that works for how you park and charge. If your panel needs an upgrade to support the added load, we handle that as part of the same project. Call for a quote and we can walk you through what your specific vehicle and home will need.
Power outages in this part of North Carolina tend to come with summer storms, and they can last longer than anyone wants. We wire standby generators and portable generator hookup setups with a proper transfer switch so that switching to backup power is safe and code-compliant. A transfer switch isolates your home from the utility line during an outage, which protects both your household and the utility workers restoring power. We handle whole-home generator hookups as well as partial-load setups for customers who want to cover the essentials. Locally owned and operated electricians handle every part of the job from the panel to the generator pad.
One call, and an electrician is on the way.
No matter what's going wrong with your wiring, protection at the panel level is one of the smartest investments a homeowner can make. A whole-home surge protection device installs at the breaker panel and catches voltage spikes before they reach your appliances, electronics, and HVAC equipment. One nearby lightning strike or a utility fluctuation can damage thousands of dollars worth of connected devices. We install whole-home surge protection as a standalone service or as part of a larger panel job.
We also perform full electrical safety inspections for homeowners who want to know the condition of their system, buyers and sellers going through a real estate transaction, and landlords managing rental properties. An inspection covers the panel, branch circuits, outlets, grounding, GFCI and AFCI protection, and visible wiring. If we find something that needs attention, we explain it clearly and give you a straightforward path to getting it corrected. Smoke detector installation and AFCI breaker upgrades are common follow-up items we handle on the same visit when possible.
We're ready to get your circuits working again.
Commercial electrical work requires a different kind of attention than residential. Downtime costs money, code requirements are stricter, and the wiring demands of a commercial space are rarely simple. We work with business owners, property managers, and contractors on commercial electrical repair, commercial panel upgrades, office wiring, retail lighting installation, and commercial rewiring projects of all sizes. Whether it is a small storefront in Matthews or a multi-tenant building in Union County, we show up prepared and work around your schedule when possible.
We've wired and repaired homes all over this area, and that same familiarity with the local building stock and code environment carries over to our commercial work. You reach a real local person who knows the area and is personally accountable for the job getting done right.
Call and we'll get the current flowing right.
We are based in Matthews and serve customers throughout Union County and the surrounding communities. Our regular service area includes Indian Trail, Stallings, Mint Hill, Waxhaw, Weddington, and Monroe, along with the neighborhoods and subdivisions spread across this part of the county. If you are just outside these areas, call us anyway. We are often closer than you think.
Getting your electrical problem handled starts with a quick call. When you reach us, we ask about what you are seeing and what kind of work you need, and we give you a clear picture of what to expect before anyone shows up at your door. We do not quote one number and charge another. If the scope of a job changes once we are on-site, we tell you before we proceed, not after the work is done.
Electrical costs vary depending on the job. A single outlet replacement is a different conversation than a 200-amp panel upgrade or a full home rewire. Rather than publish numbers that may not apply to your specific situation, we prefer to give you an accurate estimate based on what your home or business actually needs. Call for a quote and we will walk you through the pricing before any work begins.
We have been serving Matthews and the surrounding Union County area since 2003, which puts us at more than two decades of electrical work in this community. That history means we know the housing stock, the common wiring issues in the area, and what it takes to get a job done right here.
Homes in this part of Union County that were built during earlier construction booms often have panels that were sized for a lighter electrical load than what a modern household demands. Older wiring types like knob-and-tube and aluminum branch-circuit wiring also show up regularly, and we have handled both in homes throughout the area.
We work with homeowners, landlords, property managers, and businesses ranging from small offices to retail spaces. Landlords and property managers call us when a tenant reports a problem that needs to be handled quickly, and homeowners call us for everything from a single repair to a full panel upgrade or rewire.
We answer calls every day from 8:30 AM to 9:00 PM and work to get same-day appointments on the schedule for repairs that cannot wait. For non-urgent work, we typically have availability within a day or two and will give you a realistic timeline when you call.
Yes. We treat your home with the same care we would want shown in our own. That means being mindful of floors, walls, and finished surfaces while we work, and cleaning up the work area before we leave.
We do. If something we installed or repaired is not working the way it should, we want to know and we will come back to make it right. Our reputation in this community is built on jobs that hold up, not just jobs that get done.
Our electricians arrive with the tools and materials to handle a wide range of jobs, from a single outlet replacement to a panel upgrade or wiring project. For larger planned work like whole-home rewiring, we assess the job first and make sure we have everything staged properly before the work begins.
We are locally owned and operated electricians based in Matthews, and when you call, you reach someone who knows this area personally and is accountable for the work. The people who answer the phone and the people who show up at your door are part of the same local operation.
Jamprobe Electric has been serving Matthews and Union County since 2003, and we are ready to help with whatever your home or business needs today. From a single tripped breaker to a full panel upgrade, from an EV charger installation to a whole-home rewire, we handle it all. Book today. Wired tomorrow. Done by the weekend.
Call (980) 508-9795 to schedule your service or request an estimate. We answer, we show up, and we get the work done right.
From a tripped breaker to a full service upgrade, we handle the complete range of residential and commercial electrical work in Matthews and the surrounding Union County area. Every job is performed by licensed electricians who show up on time, diagnose the problem correctly, and get the work done right. The table below gives you a quick look at what each service covers, who it fits best, and what to keep in mind before you call.
| Electrical Service | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| Electrical Safety Inspections | whole-home electrical assessmentpre-sale and post-purchase inspectionsrental property compliance checksinspection report follow-up repairs | homeowners buying or selling a home, landlords, and anyone with an older home they have not had inspected | An inspection often turns up small issues before they become expensive ones. It is also a common requirement during a real estate transaction. |
| Wiring & Circuit Installation | new circuit runsgarage and shed wiringaddition and remodel wiringcode-compliant rough-in work | new construction, additions, garages, and any space that needs circuits run from scratch | New wiring work in Matthews typically requires a permit and inspection. We handle code-compliant installations from the start. |
| Electrical Repairs & Troubleshooting | flickering lights and dead outletstripping breakers and wiring faultsGFCI and AFCI failuresgrounding and bonding problems | any home or business with an electrical problem that needs a diagnosis | Getting to the actual source of the fault matters more than patching symptoms. We trace the problem before we fix it. |
| Older-Home Rewiring | whole-home rewiringknob-and-tube replacementaluminum wiring remediationgrounding upgrades in ungrounded systems | owners of older homes with original or aging wiring that no longer meets code or modern load demands | Knob-and-tube and aluminum wiring are not automatically unsafe, but they do carry real limitations and insurance implications. An inspection tells you what you are working with. |
| Breaker & Fuse Repair | breaker replacementfuse panel assessmentrepeatedly tripping breaker diagnosisarc-fault and ground-fault breaker installation | homes where breakers trip often or a single breaker has stopped holding | A breaker that trips repeatedly is usually telling you something about the circuit load or a wiring issue, not just the breaker itself. |
| EV Charger Installation | Level 2 home charger circuit240V outlet for EV chargingpanel capacity check and upgrade if neededgarage and exterior charger mounting | homeowners adding an electric vehicle and wanting a proper home charging setup | A Level 2 charger requires a dedicated 240V circuit. We assess your panel capacity and run the circuit to the right location in your garage or driveway. |
| Wiring for Additions & Remodels | kitchen and bathroom remodel wiringroom addition electrical rough-inpermit-ready installationcoordination with other trades | homeowners remodeling, adding square footage, or converting a space like a basement or garage | Remodel wiring often uncovers older wiring that needs to be brought up to code. We flag those issues during the job so nothing gets closed up in the walls until it is right. |
| Lighting Installation | recessed and LED fixture installationunder-cabinet and accent lightingoutdoor and security lightingmotion sensor and landscape lights | homeowners upgrading interior lighting or adding outdoor security and curb appeal | Exterior fixtures in the Matthews area need to be weatherproof and properly sealed. We select and install fixtures rated for outdoor exposure. |
| Electrical Panel & Service Upgrades | 200-amp service upgradessubpanel installationservice entrance and meter upgradesload calculation and capacity planning | homes with undersized panels, frequent breaker trips, or added load from remodels and new equipment | Many Union County homes built during earlier growth periods are running loads their original panels were not sized to handle. A service upgrade resolves capacity issues and brings the system up to current code. |
| Outlet & Switch Installation | standard and GFCI outlet installationAFCI and USB outletsdimmer and specialty switches240V dedicated outlet runs | homeowners adding outlets, upgrading to GFCI protection, or finishing a remodel | Kitchens, bathrooms, garages, and outdoor areas require GFCI protection by code. We make sure new installations meet current requirements. |
| Whole-Home Surge Protection | panel-level surge protector installationgrounding and bonding checksprotection for electronics and appliancespost-strike damage assessment | homeowners with sensitive electronics, smart home equipment, or appliances worth protecting | Matthews sees significant lightning activity in spring and summer. Panel-level surge protection is one of the more cost-effective ways to protect the electronics and equipment inside your home. |
| Ceiling Fan Installation | new ceiling fan wiring and mountingfan and light kit installationswitch and remote setupreplacing existing fans | homeowners adding comfort and airflow to bedrooms, living rooms, or covered porches | Boxes rated for fan support are required where a fan will be mounted. We verify the box and wiring before installation. |
| Backup Generator Installation | transfer switch installationdedicated generator circuitpanel capacity evaluationportable and standby generator hookup | homeowners who want reliable backup power during storms or outages | We handle the electrical side of generator hookups: the circuit, the transfer switch, and confirming your panel can carry the load. Thunderstorms and occasional ice storms make backup power a practical investment in this area. |
| Basement & Sump-Pump Circuits | dedicated sump pump circuitbasement outlet and lighting installationGFCI protection in wet areasfinished basement electrical rough-in | homeowners finishing a basement or adding reliable power for a sump pump | A sump pump on a shared circuit is a risk during heavy rain when the circuit is already loaded. A dedicated circuit keeps it running when it matters most. |
| Dedicated Appliance Circuits | dryer and range circuitsrefrigerator and dishwasher circuitshot tub and pool pump wiringworkshop and high-draw equipment | homeowners adding a major appliance or equipment that needs its own circuit | Running a high-draw appliance on a shared circuit causes nuisance tripping and can damage equipment. A dedicated circuit solves both problems. |
How do I know if my electrical panel needs to be upgraded?
A few signs point clearly toward a panel that has run out of capacity or is showing its age: breakers that trip often or will not reset, a panel that feels warm to the touch, a fuse box that has not been updated in decades, or a home that has added major appliances and remodels since the panel was installed. If you are adding an EV charger, a hot tub, or significant new load and the panel is already near capacity, an upgrade is usually the right call. We can assess your panel and give you a clear picture of where things stand.
What causes a breaker to keep tripping?
Repeated tripping usually means one of three things: the circuit is carrying more load than it was sized for, there is a wiring fault or short somewhere on the circuit, or the breaker itself has worn out and no longer holds reliably. Running too many high-draw appliances on a shared circuit is the most common cause in older homes. We diagnose which issue you are dealing with before recommending a fix, because the right solution depends on what is actually causing the trip.
Is the electrical work permitted and inspected?
Work that requires a permit under North Carolina electrical code gets pulled and inspected. That includes panel upgrades, service changes, new circuit installations, and wiring for additions and remodels. Permitted work protects you at resale and confirms the installation meets current code. We handle the permit process as part of the job.
Same-Day and Emergency Availability
We keep time open for urgent calls throughout the week, including weekends. When an electrical problem cannot wait, call us and we will work with your schedule to get someone out promptly.
How do I know if the wiring in my older home is safe?
Older wiring is not automatically dangerous, but it does have limitations that matter in a modern home. Knob-and-tube wiring was not designed for today's electrical loads and lacks a ground conductor. Aluminum branch-circuit wiring from the 1960s and 70s requires specific devices and connections to be used safely. An electrical safety inspection gives you a clear picture of what type of wiring you have, what its condition is, and what, if anything, needs attention.
What do flickering or dimming lights usually mean?
Occasional flickering when a large appliance kicks on can be normal, but persistent flickering, lights that dim noticeably when other things run, or flickering that happens without any obvious trigger usually points to a loose connection, an overloaded circuit, or a wiring problem that needs a closer look. In some cases it points to a panel that is struggling with the load. Either way, it is worth having an electrician check it rather than ignoring it.
What does a backup generator installation involve?
We handle the electrical side of the hookup: installing the transfer switch, running the dedicated circuit from your panel to the generator connection point, and confirming your panel has the capacity to support the load you plan to run. The transfer switch is the critical piece. It prevents the generator from back-feeding the utility line and lets you switch between utility and generator power safely. If you are not sure what size generator your home needs, we can walk through that with you on the call.
Work Performed by Licensed Electricians
Every job, residential or commercial, is performed by licensed electricians. That applies to a single outlet repair and a full service upgrade alike.
Do I need to be home when the electrician comes out?
For most jobs, yes. We need access to your breaker panel and the areas where the work will be done. If you have a specific situation where you cannot be present, call us and we will talk through what is possible. For larger jobs like a panel upgrade or rewire, someone should be available throughout the work.
How does pricing work and will the estimate change?
When you call, we ask about the work you need and give you a clear sense of what to expect before anyone comes out. For larger jobs, we assess the work in person and provide a quote before anything gets started. If the scope changes once we are on-site, we tell you before we proceed. We do not quote one number and charge another.
Upfront Quotes With No Surprise Fees
We give you a clear sense of what to expect before work begins. If the scope changes on-site, we tell you before we proceed, not after the invoice is written.
What do I need to know about installing an EV charger at home?
A Level 2 home charger runs on a dedicated 240V circuit, similar to a dryer or range circuit. Before installation, we check your panel to confirm it has the capacity to support the added load. If it does not, a panel upgrade or subpanel may be needed first. We handle the full electrical side: the circuit, the outlet or hardwired connection, and any panel work required. Most installations in a standard garage go smoothly in a single visit.
Is surge protection worth installing at the panel level?
For most homes in the Matthews area, yes. The region sees real lightning activity through spring and summer, and a single nearby strike can send a voltage spike through your wiring that damages electronics, appliances, and sensitive equipment in seconds. A whole-house surge protector installed at the panel catches that spike before it reaches your devices. It does not replace point-of-use surge strips for your most sensitive equipment, but it adds a meaningful layer of protection for everything else in the home.
When should I call an electrician instead of trying to fix it myself?
Any work that involves your breaker panel, new circuit runs, wiring inside walls, or anything that requires a permit should be handled by a licensed electrician. Beyond the safety risk, unpermitted work can create problems at resale and may not be covered by homeowner's insurance if something goes wrong. Replacing a light fixture or a switch cover plate is one thing. Opening up a panel or running new wiring is another. When in doubt, a quick call costs nothing and gives you a clear answer.
Call (980) 508-9795 to talk through what you need and get a quote from a local electrician who knows this area.
(980) 508-9795